Sealed containment, HEPA negative air and controlled removal — then an independent clearance test proving your Coral Springs property is clean.
Coral Springs · Broward County
Coral Springs was master-planned in the 1970s and 80s, so its houses age together. The same failures repeat street after street: plumbing where galvanized meets copper, second-generation roofs, and mansard details that hold wind-driven rain against the wall.
That predictability helps remediation — the damage is usually where experience says it will be, and the scope can be set without tearing out more than necessary.
Typical Coral Springs jobs are wall removals at plumbing transitions in kitchens and baths, top-of-wall and soffit work behind mansards, and lower-wall damage on canal-backed lots in Ramblewood and Westchester.
If your neighbor's house has the same floor plan and the same problem, that is not coincidence. We can tell you where to look next.
Not sure how far it has spread yet? Start with a mold inspection in Coral Springs — the scope of removal should come from lab data, not guesswork. Already have a report? Call 954-388-0218 and we’ll price the removal from it.
The job on one sheet
Contain the work area. Control the airflow.
Remove affected materials. Verify the result.
Plastic barriers and sealed access help isolate the work area from the rest of the home.
HEPA-filtered negative-air equipment draws air into the work zone and exhausts it outdoors.
Affected materials are removed and bagged within containment. Remaining surfaces are cleaned.
A third-party assessor checks the completed work before containment is removed.
Google reviews
Real reviews of our mold removal work, quoted from Google. The same crew handles remediation in Coral Springs.
“It was my first time with experience with mold, remediation, and hopefully the last … They explained everything they were doing. They made sure that their job was done. They were always on time and worked diligently to get the job done. They resolved my problem. Their Price was spot on.”
“They responded, came in quickly, efficiently and were super helpful with my mold remediation. I can already feel a huge difference in the air and can breathe so much better after only a few days! Highly recommend this company. Trustworthy and reliable!”
“Professionalism at its finest. Tal and his team were quick in their response and did A+ work. Would recommend to anyone who is looking for mold work and drywall replacement.”
“Tal was very experienced and explained everything as he went through the house. He gave us suggestions and recommendations. What’s excellent is that he will be overseeing everything throughout the project, even helping with our insurance.”
“I have a mold allergy and had them check out my walls to see if that was the source. Sure enough there was mold from a water leak! They came in quickly to clean & dry out so I could breath again! Thank you!”
“They performed mold remediation at my home. Highly recommend this company. They are on top of it, on time, and know what they are doing. Thanks again!”
Your inspector
Same Day Mold Inspections is run by Tal Eilon, Florida Licensed Mold Assessor MRSA2732. Remediation is done under the company's separate Florida mold remediator licence, and Florida law keeps the two roles apart on any one property, so when our crew remediates in Coral Springs, the clearance test that proves the work is done comes from an independent assessor, not from us.
Tal writes the remediation protocol from the inspection findings, so the scope matches what was actually found, and the same standards (IICRC S520) run through the containment, the removal and the hand-off to clearance.
Service area
ZIP codes served33063 · 33065 · 33067 · 33071 · 33076
Every address in between, too. If it’s in Coral Springs, we cover it.
No. Under Florida law a licensed mold assessor can't remediate a property they assessed, and vice versa — the two roles stay independent so nobody is grading their own homework. We'll tell you clearly which role we're filling on your Coral Springs job.
Same-generation 1970s–80s housing aging in lockstep, mansard roof details, canal-backed lots. Those patterns decide how much has to come out, not just where the mold is.
Clearance testing. Air samples taken inside the cleaned containment are compared against an outdoor baseline by an accredited lab. Passing clearance is the only proof that counts — a visual "looks clean" is not.
We take the property back to clean, dry, cleared framing and can coordinate the rebuild. Many Coral Springs homeowners use their own contractor for the finish work, and that's fine — the clearance report hands off cleanly.
Nearby: Parkland · Tamarac · Margate · Coral Springs mold inspection · all remediation areas
Licensed mold remediation across Coral Springs.
FL Licensed Mold Remediator MRSR3102 · containment & HEPA negative air on every job · independent clearance testing