Sealed containment, HEPA negative air and controlled removal — then an independent clearance test proving your Cutler Bay property is clean.
Cutler Bay · Miami-Dade County
Cutler Bay homes were mostly rebuilt or re-roofed after Hurricane Andrew, and those roofs are now thirty years old. The remediation we do here is usually overhead: attic insulation, ceiling drywall and the top of interior walls under a roof that let water in for a season before the stain showed.
On the bay side of Saga Bay and Old Cutler, storm surge and heavy rain add base-of-wall work.
Typical Cutler Bay jobs are attic and ceiling removals under aging roofs, base-of-wall work in bayside homes, and AC closet remediation around original air handlers.
Wet attic insulation holds moisture against the ceiling long after the roof is fixed. We remove it with the drywall, not after.
Not sure how far it has spread yet? Start with a mold inspection in Cutler Bay — the scope of removal should come from lab data, not guesswork. Already have a report? Call 305-882-9490 and we’ll price the removal from it.
The job on one sheet
Contain the work area. Control the airflow.
Remove affected materials. Verify the result.
Plastic barriers and sealed access help isolate the work area from the rest of the home.
HEPA-filtered negative-air equipment draws air into the work zone and exhausts it outdoors.
Affected materials are removed and bagged within containment. Remaining surfaces are cleaned.
A third-party assessor checks the completed work before containment is removed.
Google reviews
Real reviews of our mold removal work, quoted from Google. The same crew handles remediation in Cutler Bay.
“It was my first time with experience with mold, remediation, and hopefully the last … They explained everything they were doing. They made sure that their job was done. They were always on time and worked diligently to get the job done. They resolved my problem. Their Price was spot on.”
“They responded, came in quickly, efficiently and were super helpful with my mold remediation. I can already feel a huge difference in the air and can breathe so much better after only a few days! Highly recommend this company. Trustworthy and reliable!”
“Professionalism at its finest. Tal and his team were quick in their response and did A+ work. Would recommend to anyone who is looking for mold work and drywall replacement.”
“Tal was very experienced and explained everything as he went through the house. He gave us suggestions and recommendations. What’s excellent is that he will be overseeing everything throughout the project, even helping with our insurance.”
“I have a mold allergy and had them check out my walls to see if that was the source. Sure enough there was mold from a water leak! They came in quickly to clean & dry out so I could breath again! Thank you!”
“They performed mold remediation at my home. Highly recommend this company. They are on top of it, on time, and know what they are doing. Thanks again!”
Your inspector
Same Day Mold Inspections is run by Tal Eilon, Florida Licensed Mold Assessor MRSA2732. Remediation is done under the company's separate Florida mold remediator licence, and Florida law keeps the two roles apart on any one property, so when our crew remediates in Cutler Bay, the clearance test that proves the work is done comes from an independent assessor, not from us.
Tal writes the remediation protocol from the inspection findings, so the scope matches what was actually found, and the same standards (IICRC S520) run through the containment, the removal and the hand-off to clearance.
Service area
ZIP codes served33157 · 33189 · 33190
Every address in between, too. If it’s in Cutler Bay, we cover it.
No. Under Florida law a licensed mold assessor can't remediate a property they assessed, and vice versa — the two roles stay independent so nobody is grading their own homework. We'll tell you clearly which role we're filling on your Cutler Bay job.
Post-Andrew roofs reaching the end of their life, bayside flooding, and lakefront lots with a high water table. Those patterns decide how much has to come out, not just where the mold is.
Clearance testing. Air samples taken inside the cleaned containment are compared against an outdoor baseline by an accredited lab. Passing clearance is the only proof that counts — a visual "looks clean" is not.
We take the property back to clean, dry, cleared framing and can coordinate the rebuild. Many Cutler Bay homeowners use their own contractor for the finish work, and that's fine — the clearance report hands off cleanly.
Nearby: Palmetto Bay · Homestead · Pinecrest · Cutler Bay mold inspection · all remediation areas
Licensed mold remediation across Cutler Bay.
FL Licensed Mold Remediator MRSR3102 · containment & HEPA negative air on every job · independent clearance testing