The quiet oceanfront of Highland Beach
Same Day Mold Inspections
LICENSED REMEDIATION · PALM BEACH COUNTY

Mold Remediation in Highland Beach, Florida

Sealed containment, HEPA negative air and controlled removal — then an independent clearance test proving your Highland Beach home is clean.

Call 561-303-0130 FL Licensed Remediator MRSR3102
Mon–Fri 9–5 · Sat 10–4
MRSR3102FL licensed remediator
HEPA + negative airContainment on every job
IndependentThird-party clearance test
★ 5.0Google rating

Highland Beach · Palm Beach County

Mold removal in Highland Beach starts with containment, not demolition

Every property in Highland Beach has the ocean on one side and the Intracoastal on the other, so remediation here is nearly always tied to the building envelope. Salt-fatigued window systems, balcony sliders that have lost their seal and flat roof membranes over the top floor let water in at the edges, and the damage runs along the perimeter of the unit.

Removal is the easy part; the envelope repair has to be lined up with it.

Common Highland Beach jobs are window-wall and slider-wall removals in ocean-facing rooms, top-floor ceiling work under a failed roof membrane, and drywall and flooring damage from the unit above.

We coordinate with building management and the association's engineer, since the source is usually a common element.

Not sure how far it has spread yet? Start with a mold inspection in Highland Beach — the scope of removal should come from lab data, not guesswork. Already have a report? Call 561-303-0130 and we’ll price the removal from it.

The job on one sheet

How mold remediation
works in Highland Beach

Contain the work area. Control the airflow.
Remove affected materials. Verify the result.

Cutaway of a two-story Highland Beach home at night during mold remediation. An upstairs room is sealed off in plastic sheeting with a zip door: 1, sealed containment; 2, a HEPA air scrubber with its filtered exhaust ducted outdoors; 3, a technician in a protective suit removing damaged drywall, with the waste bagged inside the containment. The rest of the house is marked as unaffected living space. 4, independent clearance after cleanup: an air-sampling pump on a tripod and a checklist.
  1. 1

    Containment sealed

    Plastic barriers and sealed access help isolate the work area from the rest of the home.

  2. 2

    Negative air & HEPA

    HEPA-filtered negative-air equipment draws air into the work zone and exhausts it outdoors.

  3. 3

    Controlled removal

    Affected materials are removed and bagged within containment. Remaining surfaces are cleaned.

  4. 4

    Independent clearance

    A third-party assessor checks the completed work before containment is removed.

Google reviews

What remediation customers say

Real reviews of our mold removal work, quoted from Google. The same crew handles remediation in Highland Beach.

Tal Eilon, licensed mold assessor, in a Same Day Mold Inspections shirt

Your inspector

Tal Eilon, Florida Licensed Mold Assessor

Same Day Mold Inspections is run by Tal Eilon, Florida Licensed Mold Assessor MRSA2732. Remediation is done under the company's separate Florida mold remediator licence, and Florida law keeps the two roles apart on any one property, so when our crew remediates in Highland Beach, the clearance test that proves the work is done comes from an independent assessor, not from us.

Tal writes the remediation protocol from the inspection findings, so the scope matches what was actually found, and the same standards (IICRC S520) run through the containment, the removal and the hand-off to clearance.

  • Mold Assessor MRSA2732
  • NORMI certified
  • IICRC certified
  • Licensed & insured

Service area

Highland Beach neighborhoods we work in

  • Ocean Boulevard corridor
  • Byrd Beach
  • Boca Highland
  • Villa Magna area
  • Toscana

ZIP codes served33487

Every address in between, too. If it’s in Highland Beach, we cover it.

Questions

Highland Beach mold remediation FAQ

Something we didn’t cover? Call 561-303-0130 and ask.

What actually happens during a mold remediation in Highland Beach?

Containment and negative air first, then controlled removal of the porous material that can't be saved, HEPA cleaning and an antimicrobial treatment of what stays, then drying the source so it doesn't come back. Clearance testing closes the job.

Can't I just spray bleach on it myself?

On a small surface stain on tile or glass, sometimes. On drywall, insulation, carpet pad or cabinetry, no — bleach doesn't reach the root structure in porous material, and scrubbing without containment puts spores into the air of the rest of your Highland Beach home.

Will my insurance cover mold remediation?

Often, when the mold followed a sudden covered event like a burst supply line. Long-term seepage is usually excluded. Documentation decides it, which is why the pre-work assessment and the independent clearance both matter.

How long does the work take?

Most Highland Beach residential jobs run two to five days including drying time. Larger attic or multi-room losses take longer. You'll get a schedule before work starts, not after.

Nearby: Boca Raton · Delray Beach · Deerfield Beach · Highland Beach mold inspection · all remediation areas

Get it out properly the first time.

Licensed mold remediation across Highland Beach.

FL Licensed Mold Remediator MRSR3102 · containment & HEPA negative air on every job · independent clearance testing

📞 561-303-0130