Sealed containment, HEPA negative air and controlled removal — then an independent clearance test proving your Jupiter home is clean.
Jupiter · Palm Beach County
Jupiter homes sit between the Loxahatchee River, the inlet and the Intracoastal, and remediation here is as much about drying as removal. On the riverfront, block walls and slabs take up moisture from the ground and the dock side, so material comes out and the structure then has to be brought down to a dry reading before anything is closed up.
In Abacoa the trigger is usually mechanical — a twenty-five-year-old air handler or water heater that finally let go.
The usual Jupiter jobs are AC closet and garage water-heater losses in late-1990s construction, lower-wall removals in waterfront homes around Rivers Edge and Jonathan's Landing, and attic work under roof underlayment that has reached the end of its life.
Jupiter Farms properties add barns and detached garages. We scope every building on the lot, not just the house.
Not sure how far it has spread yet? Start with a mold inspection in Jupiter — the scope of removal should come from lab data, not guesswork. Already have a report? Call 561-303-0130 and we’ll price the removal from it.
The job on one sheet
Contain the work area. Control the airflow.
Remove affected materials. Verify the result.
Plastic barriers and sealed access help isolate the work area from the rest of the home.
HEPA-filtered negative-air equipment draws air into the work zone and exhausts it outdoors.
Affected materials are removed and bagged within containment. Remaining surfaces are cleaned.
A third-party assessor checks the completed work before containment is removed.
Google reviews
Real reviews of our mold removal work, quoted from Google. The same crew handles remediation in Jupiter.
“It was my first time with experience with mold, remediation, and hopefully the last … They explained everything they were doing. They made sure that their job was done. They were always on time and worked diligently to get the job done. They resolved my problem. Their Price was spot on.”
“They responded, came in quickly, efficiently and were super helpful with my mold remediation. I can already feel a huge difference in the air and can breathe so much better after only a few days! Highly recommend this company. Trustworthy and reliable!”
“Professionalism at its finest. Tal and his team were quick in their response and did A+ work. Would recommend to anyone who is looking for mold work and drywall replacement.”
“Tal was very experienced and explained everything as he went through the house. He gave us suggestions and recommendations. What’s excellent is that he will be overseeing everything throughout the project, even helping with our insurance.”
“I have a mold allergy and had them check out my walls to see if that was the source. Sure enough there was mold from a water leak! They came in quickly to clean & dry out so I could breath again! Thank you!”
“They performed mold remediation at my home. Highly recommend this company. They are on top of it, on time, and know what they are doing. Thanks again!”
Your inspector
Same Day Mold Inspections is run by Tal Eilon, Florida Licensed Mold Assessor MRSA2732. Remediation is done under the company's separate Florida mold remediator licence, and Florida law keeps the two roles apart on any one property, so when our crew remediates in Jupiter, the clearance test that proves the work is done comes from an independent assessor, not from us.
Tal writes the remediation protocol from the inspection findings, so the scope matches what was actually found, and the same standards (IICRC S520) run through the containment, the removal and the hand-off to clearance.
Service area
ZIP codes served33458 · 33469 · 33477 · 33478
Every address in between, too. If it’s in Jupiter, we cover it.
Containment and negative air first, then controlled removal of the porous material that can't be saved, HEPA cleaning and an antimicrobial treatment of what stays, then drying the source so it doesn't come back. Clearance testing closes the job.
On a small surface stain on tile or glass, sometimes. On drywall, insulation, carpet pad or cabinetry, no — bleach doesn't reach the root structure in porous material, and scrubbing without containment puts spores into the air of the rest of your Jupiter home.
Often, when the mold followed a sudden covered event like a burst supply line. Long-term seepage is usually excluded. Documentation decides it, which is why the pre-work assessment and the independent clearance both matter.
Most Jupiter residential jobs run two to five days including drying time. Larger attic or multi-room losses take longer. You'll get a schedule before work starts, not after.
Nearby: Tequesta · Juno Beach · Palm Beach Gardens · Jupiter mold inspection · all remediation areas
Licensed mold remediation across Jupiter.
FL Licensed Mold Remediator MRSR3102 · containment & HEPA negative air on every job · independent clearance testing