The modern Miramar town center
Same Day Mold Inspections
LICENSED REMEDIATION · BROWARD COUNTY

Mold Remediation in Miramar, Florida

Sealed containment, HEPA negative air and controlled removal — then an independent clearance test proving your Miramar property is clean.

Call 954-388-0218 FL Licensed Remediator MRSR3102
Mon–Fri 9–5 · Sat 10–4
MRSR3102FL licensed remediator
HEPA + negative airContainment on every job
IndependentThird-party clearance test
★ 5.0Google rating

Miramar · Broward County

Mold removal in Miramar starts with containment, not demolition

Miramar runs fourteen miles from a 1950s core to communities at the edge of the Everglades, and the remediation work changes along the way. In the west, homes on former wetland with a lake behind nearly every lot see irrigation and humidity damage at exterior walls.

In east Miramar, older CBS houses have original drains, low-slope additions and rooms that were cooled by window units for decades.

Common Miramar jobs are exterior-wall removals in Silver Falls, Riviera Isles and Sunset Lakes, kitchen and bath walls after a drain failure in the eastern neighborhoods, and ceiling work under flat-roofed additions.

On lake lots the wall facing the water is the one to check first. We scope it even when the visible mold is somewhere else.

Not sure how far it has spread yet? Start with a mold inspection in Miramar — the scope of removal should come from lab data, not guesswork. Already have a report? Call 954-388-0218 and we’ll price the removal from it.

The job on one sheet

How mold remediation
works in Miramar

Contain the work area. Control the airflow.
Remove affected materials. Verify the result.

Cutaway of a two-story Miramar home at night during mold remediation. An upstairs room is sealed off in plastic sheeting with a zip door: 1, sealed containment; 2, a HEPA air scrubber with its filtered exhaust ducted outdoors; 3, a technician in a protective suit removing damaged drywall, with the waste bagged inside the containment. The rest of the house is marked as unaffected living space. 4, independent clearance after cleanup: an air-sampling pump on a tripod and a checklist.
  1. 1

    Containment sealed

    Plastic barriers and sealed access help isolate the work area from the rest of the home.

  2. 2

    Negative air & HEPA

    HEPA-filtered negative-air equipment draws air into the work zone and exhausts it outdoors.

  3. 3

    Controlled removal

    Affected materials are removed and bagged within containment. Remaining surfaces are cleaned.

  4. 4

    Independent clearance

    A third-party assessor checks the completed work before containment is removed.

Google reviews

What remediation customers say

Real reviews of our mold removal work, quoted from Google. The same crew handles remediation in Miramar.

Tal Eilon, licensed mold assessor, in a Same Day Mold Inspections shirt

Your inspector

Tal Eilon, Florida Licensed Mold Assessor

Same Day Mold Inspections is run by Tal Eilon, Florida Licensed Mold Assessor MRSA2732. Remediation is done under the company's separate Florida mold remediator licence, and Florida law keeps the two roles apart on any one property, so when our crew remediates in Miramar, the clearance test that proves the work is done comes from an independent assessor, not from us.

Tal writes the remediation protocol from the inspection findings, so the scope matches what was actually found, and the same standards (IICRC S520) run through the containment, the removal and the hand-off to clearance.

  • Mold Assessor MRSA2732
  • NORMI certified
  • IICRC certified
  • Licensed & insured

Service area

Miramar neighborhoods we work in

  • Silver Falls
  • Riviera Isles
  • Sunset Lakes
  • Vizcaya
  • Miramar Park
  • Country Club Ranches

ZIP codes served33023 · 33025 · 33027 · 33029

Every address in between, too. If it’s in Miramar, we cover it.

Questions

Miramar mold remediation FAQ

Something we didn’t cover? Call 954-388-0218 and ask.

What actually happens during a mold remediation in Miramar?

Containment and negative air first, then controlled removal of the porous material that can't be saved, HEPA cleaning and an antimicrobial treatment of what stays, then drying the source so it doesn't come back. Clearance testing closes the job.

Can't I just spray bleach on it myself?

On a small surface stain on tile or glass, sometimes. On drywall, insulation, carpet pad or cabinetry, no — bleach doesn't reach the root structure in porous material, and scrubbing without containment puts spores into the air of the rest of your Miramar home.

Will my insurance cover mold remediation?

Often, when the mold followed a sudden covered event like a burst supply line. Long-term seepage is usually excluded. Documentation decides it, which is why the pre-work assessment and the independent clearance both matter.

How long does the work take?

Most Miramar residential jobs run two to five days including drying time. Larger attic or multi-room losses take longer. You'll get a schedule before work starts, not after.

Nearby: Pembroke Pines · Hollywood · Weston · Miramar mold inspection · all remediation areas

Get it out properly the first time.

Licensed mold remediation across Miramar.

FL Licensed Mold Remediator MRSR3102 · containment & HEPA negative air on every job · independent clearance testing

📞 954-388-0218