Sealed containment, HEPA negative air and controlled removal — then an independent clearance test proving your Surfside property is clean.
Surfside · Miami-Dade County
Surfside remediation splits between single-family homes on the west side and condo buildings along Collins Avenue. Both face salt air, wind-driven rain and a high water table.
Recent condo inspections and recertifications have opened walls and balconies across town, and the moisture and mold found there often has to be removed before the structural repair can go ahead.
Typical Surfside jobs are wall removals around windows and balcony doors, mold found during recertification, and base-of-wall work in ground-floor units and homes.
When remediation is part of a recertification project, we coordinate with the engineer and the contractor so the work happens in the right order.
Not sure how far it has spread yet? Start with a mold inspection in Surfside — the scope of removal should come from lab data, not guesswork. Already have a report? Call 305-882-9490 and we’ll price the removal from it.
The job on one sheet
Contain the work area. Control the airflow.
Remove affected materials. Verify the result.
Plastic barriers and sealed access help isolate the work area from the rest of the home.
HEPA-filtered negative-air equipment draws air into the work zone and exhausts it outdoors.
Affected materials are removed and bagged within containment. Remaining surfaces are cleaned.
A third-party assessor checks the completed work before containment is removed.
Google reviews
Real reviews of our mold removal work, quoted from Google. The same crew handles remediation in Surfside.
“It was my first time with experience with mold, remediation, and hopefully the last … They explained everything they were doing. They made sure that their job was done. They were always on time and worked diligently to get the job done. They resolved my problem. Their Price was spot on.”
“They responded, came in quickly, efficiently and were super helpful with my mold remediation. I can already feel a huge difference in the air and can breathe so much better after only a few days! Highly recommend this company. Trustworthy and reliable!”
“Professionalism at its finest. Tal and his team were quick in their response and did A+ work. Would recommend to anyone who is looking for mold work and drywall replacement.”
“Tal was very experienced and explained everything as he went through the house. He gave us suggestions and recommendations. What’s excellent is that he will be overseeing everything throughout the project, even helping with our insurance.”
“I have a mold allergy and had them check out my walls to see if that was the source. Sure enough there was mold from a water leak! They came in quickly to clean & dry out so I could breath again! Thank you!”
“They performed mold remediation at my home. Highly recommend this company. They are on top of it, on time, and know what they are doing. Thanks again!”
Your inspector
Same Day Mold Inspections is run by Tal Eilon, Florida Licensed Mold Assessor MRSA2732. Remediation is done under the company's separate Florida mold remediator licence, and Florida law keeps the two roles apart on any one property, so when our crew remediates in Surfside, the clearance test that proves the work is done comes from an independent assessor, not from us.
Tal writes the remediation protocol from the inspection findings, so the scope matches what was actually found, and the same standards (IICRC S520) run through the containment, the removal and the hand-off to clearance.
Service area
ZIP codes served33154
Every address in between, too. If it’s in Surfside, we cover it.
Containment and negative air first, then controlled removal of the porous material that can't be saved, HEPA cleaning and an antimicrobial treatment of what stays, then drying the source so it doesn't come back. Clearance testing closes the job.
On a small surface stain on tile or glass, sometimes. On drywall, insulation, carpet pad or cabinetry, no — bleach doesn't reach the root structure in porous material, and scrubbing without containment puts spores into the air of the rest of your Surfside home.
Often, when the mold followed a sudden covered event like a burst supply line. Long-term seepage is usually excluded. Documentation decides it, which is why the pre-work assessment and the independent clearance both matter.
Most Surfside residential jobs run two to five days including drying time. Larger attic or multi-room losses take longer. You'll get a schedule before work starts, not after.
Nearby: Bal Harbour · Bay Harbor Islands · Miami Beach · Surfside mold inspection · all remediation areas
Licensed mold remediation across Surfside.
FL Licensed Mold Remediator MRSR3102 · containment & HEPA negative air on every job · independent clearance testing